ACCESSION DISTRIBUTION TRAINING CENTER
×

Entry Level Driver Training (ELDT) - Class A

If you obtained a commercial learner’s permit (CLP) on or after February 7, 2022, completing this course is mandatory before taking your CDL skills test. Upon completion, your results will be submitted to the FMCSA Training Provider Registry. CDL testing centers will access this registry to verify that you have met the training requirements before allowing you to take the skills test.

Course Content Overview

This course covers the following 30 units required by the FMCSA for the CDL Class A ELDT.

Basic Operation
  • Orientation
  • Control Systems/Dashboard
  • Pre- and Post-Trip Inspections
  • Basic Control
  • Shifting/Operating Transmissions
  • Backing and Docking
  • Coupling and Uncoupling
Safe Operating Procedures
  • Visual Search
  • Communication
  • Distracted Driving
  • Speed Management
  • Space Management
  • Night Operation
  • Extreme Driving Conditions
Advanced Operating Practices
  • Hazard Perception
  • Skid Control/Recovery, Jackknifing, and Other Emergencies
  • Railroad-Highway Grade Crossings
Vehicle Systems and Reporting Malfunctions
  • Identification and Diagnosis of Malfunctions
  • Roadside Inspections
  • Maintenance
Non-Driving Activities
  • Handling and Documenting Cargo
  • Environmental Compliance Issues
  • Hours of Service Requirements
  • Fatigue and Wellness Awareness
  • Post-Crash Procedures
  • External Communications
  • Whistleblower/Coercion
  • Trip Planning
  • Drugs/Alcohol
  • Medical Requirements
How to Get Started
  1. Register for Our Online Course

    Registration is straightforward and takes just a few minutes. Start your course immediately after registering—no classrooms, no waiting.

  2. Begin the Course

    Take the course from any device, anywhere, anytime. We keep track of your progress, so you can log in and complete each section at your own pace.

  3. Complete the Course

    Once you finish the course, we will report your completion to the FMCSA Training Provider Registry (TPR). After that, you can proceed with your behind-the-wheel training.

ACCESSION DISTRIBUTION TRAINING CENTER
×

Entry Level Driver Training (ELDT) - Class B

If you obtained a commercial learner’s permit (CLP) on or after February 7, 2022, you must complete this course before taking your CDL skills test. Upon successful completion, your results will be submitted to the FMCSA Training Provider Registry. CDL testing centers will verify your training status through this registry before administering your skills test.

Course Content Overview

This course covers the following 29 units required by the FMCSA for the CDL Class B ELDT.

Basic Operation
  • Orientation
  • Control Systems/Dashboard
  • Pre- and Post-Trip Inspections
  • Basic Control
  • Shifting/Operating Transmissions
  • Backing and Docking
Safe Operating Procedures
  • Visual Search
  • Communication
  • Distracted Driving
  • Speed Management
  • Space Management
  • Night Operation
  • Extreme Driving Conditions
Advanced Operating Practices
  • Hazard Perception
  • Skid Control/Recovery, Jackknifing, and Other Emergencies
  • Railroad-Highway Grade Crossings
Vehicle Systems and Reporting Malfunctions
  • Identification and Diagnosis of Malfunctions
  • Roadside Inspections
  • Maintenance
Non-Driving Activities
  • Handling and Documenting Cargo
  • Environmental Compliance Issues
  • Hours of Service Requirements
  • Fatigue and Wellness Awareness
  • Post-Crash Procedures
  • External Communications
  • Whistleblower/Coercion
  • Trip Planning
  • Drugs/Alcohol
  • Medical Requirements
How to Get Started
  1. Register for Our Online Course

    Registration is quick and easy. You can start the course immediately after signing up—no need to wait.

  2. Begin the Course

    Access the course from any device, anywhere, at any time. We track your progress so you can log in and complete each section at your convenience.

  3. Complete the Course

    Upon course completion, we will report your results to the FMCSA Training Provider Registry (TPR), allowing you to proceed with behind-the-wheel training.

ACCESSION DISTRIBUTION TRAINING CENTER
×

Entry Level Driver Training (ELDT) - Class B to A Upgrade

If you obtained a commercial learner’s permit (CLP) on or after February 7, 2022, you must complete this course before upgrading your Class B license to a Class A. Once you finish the course, your results will be submitted to the FMCSA Training Provider Registry. CDL testing centers will verify your training completion through this registry before allowing you to take the skills test.

Course Content Overview

This course includes the following 22 units required by the FMCSA for the CDL Class B to A ELDT upgrade.

Basic Operation
  • Orientation
  • Control Systems/Dashboard
  • Pre- and Post-Trip Inspections
  • Basic Control
  • Shifting/Operating Transmissions
  • Backing and Docking
  • Coupling and Uncoupling
Safe Operating Procedures
  • Visual Search
  • Communication
  • Distracted Driving
  • Speed Management
  • Space Management
  • Night Operation
  • Extreme Driving Conditions
Advanced Operating Practices
  • Hazard Perception
  • Skid Control/Recovery, Jackknifing, and Other Emergencies
  • Railroad-Highway Grade Crossings
Vehicle Systems and Reporting Malfunctions
  • Identification and Diagnosis of Malfunctions
  • Roadside Inspections
  • Maintenance
Non-Driving Activities
  • Hours of Service Requirements
  • Fatigue and Wellness Awareness
How to Get Started
  1. Register for Our Online Course

    Registration is quick and straightforward. You can begin the course immediately after signing up—no need to wait.

  2. Begin the Course

    Access the course from any device, anywhere, at any time. We track your progress so you can log in and complete each section at your convenience.

  3. Complete the Course

    Upon course completion, we will report your results to the FMCSA Training Provider Registry (TPR), enabling you to proceed with behind-the-wheel training.

ACCESSION DISTRIBUTION TRAINING CENTER
×

Entry Level Driver Training (ELDT) - HazMat Endorsement Course

If you plan to add a Hazardous Materials Endorsement (H) to your CDL license, you must complete this course before taking the knowledge test for hazardous materials. Upon course completion, your results will be submitted to the FMCSA Training Provider Registry. CDL testing centers will verify your training completion through this registry before allowing you to proceed with the knowledge test.

Course Content Overview

This course includes the following 13 units mandated by the FMCSA for the ELDT Hazardous Materials (H) Endorsement:

  • Basic Introductory HM Requirements
  • Operational HM Requirements
  • Reporting HM Crashes and Releases
  • Tunnels and Railroad (RR)-Highway Grade Crossing Requirements
  • Loading and Unloading HM
  • HM on Passenger Vehicles
  • Bulk Packages
  • Operating Emergency Equipment
  • Emergency Response Procedures
  • Engine (Fueling)
  • Tire Check
  • Routes and Route Planning
  • Hazardous Materials Safety Permits (HMSP)
How to Get Started
  1. Register for Our Online Course

    Registration is quick and easy. You can start the course immediately after signing up—no waiting, no classrooms.

  2. Begin the Course

    Access the course from any device, anywhere, at any time. We track your progress so you can log in and complete each section at your convenience.

  3. Complete the Course

    Upon completion, we will report your results to the FMCSA Training Provider Registry (TPR), allowing you to proceed with the knowledge test for the HazMat endorsement.

ACCESSION DISTRIBUTION TRAINING CENTER
×

Entry Level Driver Training (ELDT) - Passenger Endorsement Course

To add a Passenger Endorsement (P) to your CDL license, you must complete this course before you are eligible to take the skills test. Upon finishing the course, your results will be submitted to the FMCSA Training Provider Registry. CDL testing centers will verify your completion status through this registry before allowing you to proceed with the skills test.

Course Content Overview

This course covers the following 18 units required by the FMCSA for the ELDT Passenger (P) Endorsement:

  • Post-Crash Procedures
  • Other Emergency Procedures
  • Vehicle Orientation
  • Pre-Trip, Enroute, and Post-Trip Inspection
  • Fueling
  • Idling
  • Baggage and/or Cargo Management
  • Passenger Safety Awareness Briefing
  • Passenger Management
  • Americans with Disabilities Act (ADA) Compliance
  • Hours of Service (HOS) Requirements
  • Safety Belt Safety
  • Distracted Driving
  • Railroad (RR)-Highway Grade Crossings and Drawbridges
  • Weigh Stations
  • Security and Crime
  • Roadside Inspections
  • Penalties and Fines
How to Get Started
  1. Register for Our Online Course

    Registration is quick and straightforward. Begin the course immediately after signing up—no classrooms, no waiting.

  2. Begin the Course

    Access the course from any device, at any location, and at any time. We track your progress so you can log in and complete each section at your own pace.

  3. Complete the Course

    Once you complete the course, we will report your results to the FMCSA Training Provider Registry (TPR). You can then proceed to the skills test.

ACCESSION DISTRIBUTION TRAINING CENTER
×

Entry Level Driver Training (ELDT) - School Bus Endorsement Course

To add a School Bus Endorsement (S) to your CDL license, you must complete this course before you are eligible to take the skills test. Upon completing the course, your results will be submitted to the FMCSA Training Provider Registry. CDL testing centers will verify your completion status through this registry before allowing you to proceed with the skills test.

Course Content Overview

This course includes the following 11 units required by the FMCSA for the ELDT School Bus (S) Endorsement:

  • Danger Zones and Use of Mirrors
  • Loading and Unloading
  • Vehicle Orientation
  • Post-Crash Procedures
  • Emergency Exit and Evacuation
  • Railroad-Highway Grade Crossings
  • Student Management
  • Special Safety Considerations
  • Pre- and Post-Trip Inspections
  • School Bus Security
  • Route and Stop Reviews
How to Get Started
  1. Register for Our Online Course

    Registration is quick and straightforward. Start the course immediately after signing up—no classrooms, no waiting.

  2. Begin the Course

    Access the course from any device, anywhere, at any time. Your progress is tracked so you can log in and complete each section at your own pace.

  3. Complete the Course

    Upon completion, we will report your results to the FMCSA Training Provider Registry (TPR). You can then proceed to the skills test.

man is driving a truck

Commercial Drivers License

Qualified drivers for every job

Accession Distribution Training Center provides top-tier training for individuals seeking a Commercial Driver’s License (CDL), ensuring they are fully equipped to excel in the transportation industry. Our program focuses on safety, skill development, and regulatory compliance to prepare you for a successful driving career.

Our CDL training includes:

  • Comprehensive Classroom Instruction: Covering all essential safety and regulatory knowledge.
  • Hands-On Driving Experience: Real-world training with experienced instructors.
  • Exam Preparation: Thorough guidance to help you pass your CDL exams with confidence.

REGISTER NOW

Learn More

Contact us to find out how we can help you train and be certified confidently and efficiently.